No Partner? No Problem! The Hercule 42-60 will help you install the top sheets of drywall on the wall if your partner decided they would rather sleep than work.

 

Designed for taping in small, tight spaces.

Includes:

• 24" Compound Tube
• 2-wheel Inside Applicator
• Closet Monster Handle
• 2.5" Standard Flusher
• 3" Widetrack Standard Flusher

The NEW Predator Tactical Set makes moving to Automatic Taping Tools easy and includes the upgrade of the Columbia Predator Carbon Fibre Automatic Taper! Every taping tool you will need to completely finish a house comes packaged inside our durable, rugged Road Case. This set takes the guess work out of choosing the perfect drywall taping tools kit.

Note: Columbia Automatic boxes do not fit in Road Case.

SET INCLUDES:

• Road Case
• Predator Automatic Taper
• 10" Flat Box
• 12" Flat Box
• Matrix Handle
• 7" Tomahawk
• 24" Tomahawk
• 8" Throttle Box
• 3" Anglehead
• Hot Mud Pump
• Box Filler & Gooseneck
• Corner Roller
• AHA
• 3" Nail Spotter
• Columbia One Handle and Columbia One EXT
• Sander Head
• Twist Lock Handle
• Tomalock Adapter
• Repair Kits: AH-RK, FFBR9-10, FFBR9-12, FFBR7-7A, CTR-1

Exclusive at Bart's Taping Tools.

Includes:

• 3" Joint Knife
• 4" Joint Knife
• 5" Joint Knife
• 6" Joint Knife
• 8" Joint Knife
• 10" Joint Knife

*Comes with bucket & lid.

Exclusive at Bart's Taping Tools.

Includes:

• 1.5" Joint Knife
• 2" Joint Knife
• 3" Joint Knife
• 4" Joint Knife
• 5" Joint Knife
• 6" Joint Knife
• 8" Joint Knife
• 10" Knife

*Comes with bucket & lid.

The Tallboy is a mud pump that will allow you to stand upright while filling your tools. The extra height also allows for use in a 30 gallon pale for those who want to cut down on mixing time.

FEATURES:

• Ergonomically superior
• 20 degree angled handle makes pumping easier and more comfortable
• User can see when taper is full when using goose neck
• Saves physical stress and energy
• Moveable bracket to fit all 5 gallon pails

The TapeTech Automatic Taper Extension adds 76 cm to your 07TT EasyClean® Automatic Taper. With nearly 60% more length compared to the Taper alone, you’ll easily reach joints up to 3.6 m high without the need to invest in a dedicated, extra-long taper that is only used occasionally. The Automatic Taper Extension connects quickly and easily to the automatic taper and requires no tools. The extension provides its own control tube for advancing and cutting the paper tape as well as an independent creaser wheel control lever.

ON SALE!

Includes:

• 6 Blades: 7", 10", 14", 16", 24", 48"
• Adapter
• 52"-90" Handle
• 25"-36" Handle
• BeroXpert Mud Roller
• Aluminum Case*

*Please note: that aluminum case has slight markings from storage and is set at an already discounted price.

Regular Total: $1,026.05

Sale Price: $749.00

For a limited time, save $55.00 on the EasyClean 10" Box.

*While quantities last.

The TapeTech EasyClean Finishing Box automatically dispenses the proper amount of joint compound and feathers the edges of butt joints and flat joints in one pass. The EasyClean Finishing Box helps produce professional results every time. The adjustable crown setting dial allows the user to easily adjust the amount of joint compound applied over the tape on the drywall joint. This is very helpful when progressing from the first finishing application to the second or third application. The pivoting axle helps to compensate when the drywall or sheetrock on one side of the joint is higher than the other side of the joint.

• Applies first coat of joint compound to embed tape at butt joints and flat joints on walls and ceilings
• Finishes butt joints and flat joints on walls and ceilings
• Feathers edges of butt joints and flat joints

Features:

• Anodized Aluminum Box
• Adjustable Crown Control
• Solid Brass Blade Holder
• Hardened Steel Blade
• Pivoting Axle

For a limited time, Save $$ on the following Angle Heads:

• 3.0" without wheels
• 3.0" with wheels
• 3.5" with wheels.

*Until supplies last.

Drywall Master Bone Head Angle Heads are the perfect Corner Finishers. Bone Head Angle Heads exhibit extra thick, extremely durable, and beefy center clips. The frames are made of solid billet aluminum for increased longevity. We use military grade stainless steel for extra life and maximum corrosion resistance. 

 

Features:

• Higher grade stainless steel
• Thick, billet frames for increase longevity
• Frames and body are CNC machined for precision tolerances
• Quality Made in the USA (parts and assembly)

Purpose: The Angle Head/Corner Finisher is probably the most used Automatic Taping Tool on the market. Often, this is the first or second product that hand tapers will convert over to (Flat Finishers being the other). The results from these products are far superior to any results done only by hand. The purpose of the Angle Head is to provide a “Bed Coat” and “Finishing Coat” over both sides of the inside corners at the same time. Drywall Master encourages our customers to use the 2.5″ Angle Head/Corner Finisher for the initial (Flushing or Wiping) coat. For the second (Skimming or Finishing) coat, we encourage our customers to use the 3″ or 3.5″ Angle Head in conjunction with a Corner Applicator/Box. However, Drywall Master acknowledges that over the years many contractors in different areas have developed more than one variation of which size Angle Head to use for different coatings. We just happen to believe that our Perfectly CNC machined Angle Heads will work best for whatever those variations are.

Includes:

• Inside Applicator
• Flat Applicator
• 42" Compound Tube
• Inside Corner Roller w/ Extendable Handle
• Flusher Handle
• 2" & 3" Flushers
• Hard Shell Case